TYPE: | Hot-rolled wire rod | STEEL GRADES: | 1) SAE 1006 according to ASTM A510M | 2) SAE 1008 according to ASTM A510M | 3) SAE 1010 according to ASTM A510M | 4) Electrode quality (USD 7) according to DIN 17145 | 5) RSt 37-2 according to DIN 17100 | FORM - DIAMETER: | Coils. Diameters: from 5.5 to 20mm | COIL WEIGHT: | Approximately 1.250-1.450Kg per coil | DIAMETER, WEIGHT, TOLERANCES: | According to DIN 59110 | CHEMICAL COMPOSITION OF WIRE ROD STEEL GRADES | | STEEL GRADES | C (%) max | Mn (%) | S (%) max | P (%) max | Si (%) max | Cr (%) max | Ni (%) max | Cu (%) max | TYPICAL USES | | SAE 1006 | 0,08 | 0,30-0,40 | 0,025 | 0,020 | 0,08 | 0,10 | 0,10 | 0,15 | Black and galvanized wires, small nails | | SAE 1008 | 0,09 | 0,30-0,50 | 0,030 | 0,020 | 0,10 | 0,15 | 0,15 | 0,25 | Black and galvanized wires, nails, galvanized fencing mesh | | SAE 1010 | 0,10 | 0,40-0,60 | 0,040 | 0,025 | 0,15 | 0,20 | 0,20 | 0,35 | Concrete reinforcing mesh, standard wire mesh, nails, galvanized fencing mesh | | ELECTRODE QUALITY | 0,09 | 0,40-0,60 | 0,025 | 0,020 | 0,05 | 0,10 | 0,10 | 0,15 | Coated welding electrodes (according to DIN 17145 / USD7) | | RSt 37-2 | 0,12 | 0,40-0,65 | 0,040 | 0,025 | 0,20 | 0,20 | 0,20 | 0,40 | Concrete reinforcing mesh | | | | | | | | | | | | | | |
DIAMETERS, WEIGHT AND TOLERANCES OF WIRE ROD | DIAMETER d (mm) | PERMISSIBLE DEVIATION (mm) | NOMINAL CROSS-SECTION (cm2) | NOMINAL WEIGHT (Kg/m) | PERMISSIBLE OUT-OF-ROUNDNESS (mm) | 5,5 | -0,3 / +0,3 | 0,238 | 0,187 | 0,48 | 6,0 | -0,3 / +0,3 | 0,283 | 0,222 | 6,5 | -0,3 / +0,3 | 0,332 | 0,260 | 7,0 | -0,4 / +0,4 | 0,385 | 0,302 | 0,64 | 8,0 | -0,4 / +0,4 | 0,503 | 0,395 | 9,0 | -0,4 / +0,4 | 0,636 | 0,499 | 10,0 | -0,4 / +0,4 | |
|
.jpg)
